Maintenance Of Non-woven Equipment

Maintenance work should be carried out from several aspects to ensure that our equipment can be fully maintained, so that our non-woven equipment can be used for a longer time. If you have any doubts about the use of non-woven equipment, you can communicate with us and we will give you a satisfactory answer.
Non-woven equipment has been used for a long time, and various problems will occur, which require us to repair. Therefore, general equipment will be regularly repaired to reduce the possibility of equipment failure. Therefore, the maintenance of the equipment is very important. Now we will introduce to you how to maintain the non-woven equipment. This is also a concern of many people, because if the equipment maintenance work is done properly, the service life of our equipment will also be shortened. can be greatly extended. And our company, as a reliable non-woven equipment manufacturer, knows a lot about this aspect.

  1. The first-level maintenance work is carried out on the basis of routine maintenance, and the key work content is lubrication, tightening and inspection of all relevant parts and cleaning.
  2. The secondary maintenance work focuses on inspection and adjustment. Specifically, check the working conditions of the motor, transmission, transmission mechanism, working device, air pressure system and electrical system and make some adjustments to eliminate the found faults to ensure that the mechanical assemblies and parts have good working performance.
  3. The key is to detect, adjust, eliminate hidden troubles and balance the wear degree of various parts. The parts that affect the use performance and the parts with faults and symptoms should be diagnosed and checked, and the status detection should be carried out, and then the work of replacement, adjustment and troubleshooting should be completed.
  4. PP Spunbond Machine